Tabiiy fanlar

STUDYING THE PROCESS OF OBTAINING ZINC NITRATE FROM SECONDARY ZINC RAW MATERIALS

Waste zinc catalysts, temperature, nitric acid, degree of extraction, time, zinc oxide.

Authors

  • Шахзод ТАВАШОВ Каршинский инженерно-экономический институт Доцент кафедры химической технологии, Uzbekistan

The results of studies on the production of zinc nitrate from waste zinc catalysts are presented. The waste zinc catalysts contains
74.55% ZnO. The influence of technological factors on the degree of zinc extraction from the waste zinc catalysts by nitric acid
has been investigated. The optimal parameters of the process have been determined. The maximum degree of zinc extraction is
observed at an acid rate of 120%, and a nitric acid concentration of 30%. At the same time, the degree of zinc extraction reaches
91.18%. An increase in the duration of the process from 1 to 3 hours increases the degree of zinc extraction from 25.47% to
91.18% with other constant parameters. An increase in temperature from 55 to 95 ℃ contributes to an increase in the degree of
zinc extraction to 91.18%.