QUYOSH ELEMENTLARI UCHUN Sb2(SxSe1-x)3-YUPQA QATLAMLARI OLISH JARAYONLARINING TAHLILLARI
##submission.downloads##
Sb2(SxSe1-x)3 yupqa qatlamlarini ishlab chiqarish jarayoni yupqa qatlamning fizik xususiyatlari va quyosh elementlari
samaradorligida muhim rol o‘ynaydi. Ishlab chiqarish jarayonini optimallashtirish va qurilma samaradorligini oshirish uchun o‘sish
sharoitlari parametrlari o‘rtasidagi o‘zaro ta’sirni o‘rganish vaqt va resurslarni talab qiladi. Ushbu ishda biz Sb2(SxSe1-x)3 yupqa
qatlamlarini ishlab chiqarish jarayonini optimallashtirish uchun tajribaviy ma’lumotlardan foydalanib, mashinaviy o‘qitish usullari
yordamida tahlil qilindi. Optimallashtirilgan ML modellari VOC ni prognoz qilishda o‘rtacha kvadratik xato 1% va Pearson
koeffitsienti r 0.9 ga yuqori aniqlikni namoyish etadi.
1. X. Wang, R. Tang, C. Wu, C. Zhu, T. Chen, Development of antimony sulfide–selenide Sb2(S, Se)3-based solar cells, Journal
of Energy Chemistry 27 (2018). https://doi.org/10.1016/j.jechem.2017.09.031.
2. L. Zhang, K. Wu, J. Yu, Y. Yu, Y. Wei, Sb2Se3 films fabricated by thermal evaporation and post annealing, Vacuum 183
(2021). https://doi.org/10.1016/j.vacuum.2020.109840.
3. Y.C. Lin, C.H. Chang, Y.J. Hung, Bandgap grading via sputtering and post-selenization using SeS2 powder enabling
Sb2(S,Se)3 solar cells with 7.1% efficiency, Solar Energy Materials and Solar Cells 259 (2023).
https://doi.org/10.1016/j.solmat.2023.112464.
4. Y. Zhao, S. Wang, C. Li, B. Che, X. Chen, H. Chen, R. Tang, X. Wang, G. Chen, T. Wang, J. Gong, T. Chen, X. Xiao, J. Li,
Regulating deposition kinetics via a novel additive-assisted chemical bath deposition technology enables fabrication of
10.57%-efficiency Sb2Se3 solar cells, Energy Environ. Sci. 15 (2022). https://doi.org/10.1039/d2ee02261c.
5. X. Chen, B. Che, Y. Zhao, S. Wang, H. Li, J. Gong, G. Chen, T. Chen, X. Xiao, J. Li, Solvent-Assisted Hydrothermal
Deposition Approach for Highly-Efficient Sb2(S,Se)3 Thin-Film Solar Cells, Adv. Energy Mater. 13 (2023).
https://doi.org/10.1002/aenm.202300391.
6. S. Wang, Y. Zhao, B. Che, C. Li, X. Chen, R. Tang, J. Gong, X. Wang, G. Chen, T. Chen, J. Li, X. Xiao, A Novel MultiSulfur Source Collaborative Chemical Bath Deposition Technology Enables 8%-Efficiency Sb2S3 Planar Solar Cells,
Advanced Materials 34 (2022). https://doi.org/10.1002/adma.202206242.
7. S. Rühle, Tabulated values of the Shockley-Queisser limit for single junction solar cells, Solar Energy 130 (2016).
https://doi.org/10.1016/j.solener.2016.02.015.
8. G.X. Liang, Y. Di Luo, S. Chen, R. Tang, Z.H. Zheng, X.J. Li, X.S. Liu, Y.K. Liu, Y.F. Li, X.Y. Chen, Z.H. Su, X.H. Zhang,
H.L. Ma, P. Fan, Sputtered and selenized Sb2Se3 thin-film solar cells with open-circuit voltage exceeding 500 mV, Nano
Energy 73 (2020). https://doi.org/10.1016/j.nanoen.2020.104806.
9. J. Dong, Y. Liu, Z. Wang, Y. Zhang, Boosting V OC of antimony chalcogenide solar cells: A review on interfaces and defects
, Nano Select 2 (2021) 1818–1848. https://doi.org/10.1002/nano.202000288
10. J. Zhou, H. Chen, X. Zhang, K. Chi, Y. Cai, Y. Cao, J. Pang, Substrate dependence on (Sb4Se6)n ribbon orientations of
antimony selenide thin films: Morphology, carrier transport and photovoltaic performance, J. Alloys Compd. 862 (2021).
https://doi.org/10.1016/j.jallcom.2021.158703.
11. A. Mavlonov, T. Razykov, F. Raziq, J. Gan, J. Chantana, Y. Kawano, T. Nishimura, H. Wei, A. Zakutayev, T. Minemoto,
X. Zu, S. Li, L. Qiao, A review of Sb2Se3 photovoltaic absorber materials and thin-film solar cells, Solar Energy 201 (2020).
https://doi.org/10.1016/j.solener.2020.03.009
12. H. Chen, Z.Q. Li, B. Sun, X.D. Feng, Towards high-efficiency planar heterojunction antimony sulfide solar cells, Opt. Mater.
(Amst). 121 (2021). https://doi.org/10.1016/j.optmat.2021.111556.
13. J. Xue, J. Huang, G. Liu, M. Li, Z. Wei, Z. Lai, N. Qu, Y. Liu, Y. Fu, J. Zhu, Efficient design of lightweight AlCrFeNiTibased high-entropy alloys via computational thermodynamics and interpretable machine learning, Vacuum 225 (2024)
113290. https://doi.org/10.1016/J.VACUUM.2024.113290.
14. C. Zhu, W. Liu, Y. Li, X. Huo, H. Li, K. Guo, B. Qiao, S. Zhao, Z. Xu, H. Zhao, D. Song, Key factors governing the device
performance of CIGS solar cells: Insights from machine learning, Solar Energy 228 (2021).
https://doi.org/10.1016/j.solener.2021.09.031.
15. G. Otnes, D. Lindholm, H. Fjær, P. Seljom, S.E. Foss, Machine learning assisted representative period selection as input to
modelling of field degradation in photovoltaic modules, Solar Energy Materials and Solar Cells 263 (2023) 112559.
https://doi.org/10.1016/J.SOLMAT.2023.112559.
16. F. Li, X. Peng, Z. Wang, Y. Zhou, Y. Wu, M. Jiang, M. Xu, Machine Learning (ML)-Assisted Design and Fabrication for
Solar Cells, Energy and Environmental Materials 2 (2019) 280–291. https://doi.org/10.1002/eem2.12049.
17. Ç. Odabaşı, R. Yıldırım, Machine learning analysis on stability of perovskite solar cells, Solar Energy Materials and Solar
Cells 205 (2020). https://doi.org/10.1016/j.solmat.2019.110284.
18. Y. Liu, W. Yan, S. Han, H. Zhu, Y. Tu, L. Guan, X. Tan, How Machine Learning Predicts and Explains the Performance of
Perovskite Solar Cells, Solar RRL 6 (2022). https://doi.org/10.1002/solr.202101100.
19. J. Li, B. Pradhan, S. Gaur, J. Thomas, Predictions and Strategies Learned from Machine Learning to Develop HighPerforming Perovskite Solar Cells, Adv. Energy Mater. 9 (2019). https://doi.org/10.1002/aenm.201901891.
20. S.M. Lundberg, S.I. Lee, A unified approach to interpreting model predictions, in: Adv. Neural Inf. Process. Syst., 2017
Mulkiiyat (c) 2026 «O‘zMU XABARLARI»
Ushbu ish quyidagi litsenziya asosida ruxsatlangan Kreativ Commons Attribution-NonCommercial-ShareAlike 4.0 International litsenziyasi asosida bu ish ruxsatlangan..
.jpg)
.png)
